You have no items in your shopping cart.
Subtotal: €0.00
new products
-
LP244XY3C speaker cable eXtreme, PVC black, 24 x 4,0 mm² with PA-COM® 25p. F without ring-M with ring
- conductor cross section: 24 x 4.0 mm²
- with transparent heat shrink on both sides for free labeling
- suitable for D&B
- extremely resistand to repeated bending due to extra fine stranded conductors and very short length of core twisting acc. to VDE 0295, class 6 (IEC 60228 cl.6)
- very stable construction, only low elongation of the outer sheath with vertical suspension
- increased tensile strength due to textile braiding
- low-temperature-flexible down to -40 °C
- Z5328.xxx
-
SACT24MN06M SPUTNIK D&B speaker adapter with PA-COM® 25p. M and 6x NLT4M
- suitable for D&B
- LSC425 - stranded bare copper, 50 x 0.25 mm, high-flexible
- PA-COM® 25p. male with ring
- speakON NLT4 all pins wired
- Z5325.000 LKA25M => 6x NLT4M adapter
- including KLOTZ cable carrier with brass eyelet for easy suspension
-
SACT24MN12M SPUTNIK D&B speaker adapter with PA-COM® 25p. M and 12x NLT4M
- suitable for D&B
- LY225T - 50 x 0.25 mm, stranded bare copper, extraordinary flexible
- PA-COM® 25p. male with ring
- for d&b T series
- Z5327.000 LKA25M => 12x NLT4M adapter
- including KLOTZ cable carrier with brass eyelet for easy suspension
-
L44YSPMFFSWAP speaker cable 4 x 4,0 mm² with metal speakON F-F as pin swap adapter
- conductor cross section: 4 x 4.0 mm²
- pin swap adapter 1>2, 2>1
- is used to connect two BOSE SMS118 subwoofers which are used as EFA (Endfire Array)
- also for the wiring of delaylines with fully assembled NL4 cables this cable is very useful
- extremely flexible
-
LSC2440YS flexible 24-way multicore loudspeaker cable 4.0 mm²
- for multi-amplifier systems
- extremely resistand to repeated bending due to extra fine stranded conductors and very short length of core twisting acc. to VDE 0295, class 6 (IEC 60228 cl.6)
- increased tensile strength due to textile braiding
- low-temperature-flexible down to -40 °C
-
F-BL..M5A-E fiber optic breakout cable - I-V(ZN)HH n x OM3
- semi-tight buffered fibres (strippable up to 100 cm)
- up to 8 individual cables with strain relief
- flame retardant and non corrosive (FRNC)
- CPR class Eca acc. to EN50575
-
F-BL..N5V-E fiber optic breakout cable - I-V(ZN)HH n x OM4
- semi-tight buffered fibres (strippable up to 100 cm)
- up to 8 individual cables with strain relief
- flame retardant and non corrosive (FRNC)
- CPR class Eca acc. to EN50575
-
C6ASFEY04 MultiCAT6A - 4 x (4 x 2 x AWG23/1) - S/FTP - 500MHz
- low loss AWG23/1 solid conductors
- 10GBase-T links up to 100 m
- double shielded (S/FTP)
- CPR class Fca
-
C5SFUEH-D data cable - CAT5e - AWG24/1 - SF/UTP - FRNC Dca
- SF/UTP (overall foil + braid shield)
- 4x 2x 0,52 mm (AWG 24/1) - solid conductors
- flame retardant and non-corrosive
- CPR class Dca - s1, d1, a1 acc. to EN50575
-
RG213-HB-E 50 Ohm - coax cable RG213/U - FRNC Eca
- 50 Ohm characteristic impedance
- flame retardant and non corrosive (FRNC)
- CPR class Eca acc. to EN50575