fiber optic indoor cable
DUPLEX-Flat - I-V(ZN)HH - 2 x .../125
F-DL02M5A
- flat duplex breakout cables
- semi-tight buffered fibres (strippable up to 100 cm)
- flame retardant and non corrosive (FRNC)
Lieferzeit
2-3 Tage
order code: F-DL02M5A
| no. of fibers: | 2 |
| fiber type: | Multimode 50/125 µm |
| fiber category: | OM3 |
| cable color: | aqua |
| weight: | 0.02 kg/m |
Stock:
short-notice delivery possible
€2.27
/ m
incl. German VAT and incl. postage within Germany
this product is available for business customers only
design
| no. of fibres: 2 |
| core type: semi-tight buffered fibre, Ø 0.9 mm |
| strain relief: longitudinal aramid yarns |
| element jacket: FRNC, Ø 2.10 mm |
| element arrangement: lying parallel next to each other |
| outer jacket: figure-0 form |
properties
| tensile strength: 600 N |
| crush resistance: 400 N/dm |
| min. bending radius: |
| temperature range: |
| halogen-free: IEC 60754-2 |
| flame retardancy: IEC 60332-1 and IEC 60332-3-24 |
| smoke density: acc. to IEC 61034 |
| heat of combustion: 0.63 MJ/m |
- technical data sheet 27.68 kB
- Tender documentation texts: The article texts and article data provided by us are available in downloadable txt format. Data can be used in tender applications. By downloading these files you acknowledge that KLOTZ AIS assumes no liability for the correct further use of the data and in particular for its correctness, given that you receive the data as unprotected txt documents to enable their rapid and convenient further processing.The files and data are the intellectual property of KLOTZ AIS GmbH and must not be changed or used for any purposes other than for tenders. 1.48 kB
These duplex cables feature an additional protective jacket of halogen-free flame-retardant material as protection against high mechanical strain in building cabling systems with long feed lengths. Connector assembly is direct and cost-effective thanks to the cable design featuring parallel breakout elements (single fibres with individual strain relief and protective jacket). Thanks to their semi-tight buffered fibres (maximum stripping length 1000 mm), the cables are also suitable for pigtails and splicing.
