More Views

new - new product

DX10 passive DI-box

  • handmade in germany
  • handwired KLOTZ transformer with mu-metal shield for better RF isolation
  • custom made 100% mu-metal transformer core
  • transformer with a ratio of 6+6:1
  • robust and shielding stainless steel housing with hard-wearing laser engraving
  • significantly more sound-neutral and stable than other DI-boxes on the market
  • 5 years warranty
  • successor of D10KL
DX10

SKU: DX10

typeDI box, passive
colourblack
materialextremely stable with clearly more sound
weight0,5918 kg
stock:
short-notice delivery possible
€153.51 / pcs
Incl. 19% Tax, excl. Shipping Cost
incl. German VAT plus postage

box

housingheavy duty, all metal shell (stainless steel)
dimensionsl= 103 mm; w= 75 mm; h= 49 mm

technical specifications

unbal. input and output6.3 mm jack socket
balanced outputXLR 3p. male
max. input level at attn. OFF+10 dBu (2.5 V) / 20 kΩ
max. input level at attn. 20+30 dBu (25 V) / 40 kΩ
max. output level-10 dBu (250 mV) / 200 Ω
frequency response10 Hz - 30 kHz (+/- 0.3 dB)
harmonic distortion<0.1 %

Details

Mixing desks love balanced signals –but not all signal sources deliver them. Guitar or bass amps and keyboards rarely have balanced outputs, and guitars cannot be connected directly to a mixer. This is where the KLOTZ DX10 comes in!
A DI box converts a high-ohm unbalanced signal into a low-ohm balanced signal. To do this, the signal from the instrument is fed into the DI box between the instrument and the amp. “DI” stands for “direct injection” because the DI box is directly “injected” or fed with the instrument signal.
The KLOTZ DX10 then balances the signal so that it can be transmitted over long distances without hiss or background noise before it is fed into a mixer for further processing. The KLOTZ DX10 is a passive DI box; unlike active DI boxes, it does not require an external power supply. Just connect it up, and away you go!
We ensure all our components are manufactured to high quality in conformity with our rigorous company standards. The transformer is by far the most important component in a DI box, and the one that has the most influence on the sound. It has a 6+6:1 transformer ratio. The transformer we use in the KLOTZ DX10 was developed by us in-house with special care, to reflect its crucial role in the performance and sound behaviour of the DI box. Only the best materials were good enough. We chose mu-metal, a soft magnetic nickel-iron alloy with outstanding permeability (magnetic conductivity). The KLOTZ DX10 offers neutrality and stability of sound that is superior to other DI boxes on the market. Say goodbye to distortion!
We applied the same high quality standards when choosing the other components. The ultra-rugged housing easily copes with the stresses and strains of live performance. We’re so convinced by our quality that every KLOTZ DX10 carries a 5-year warranty!

Technical Data

box

housingheavy duty, all metal shell (stainless steel)
dimensionsl= 103 mm; w= 75 mm; h= 49 mm

technical specifications

unbal. input and output6.3 mm jack socket
balanced outputXLR 3p. male
max. input level at attn. OFF+10 dBu (2.5 V) / 20 kΩ
max. input level at attn. 20+30 dBu (25 V) / 40 kΩ
max. output level-10 dBu (250 mV) / 200 Ω
frequency response10 Hz - 30 kHz (+/- 0.3 dB)
harmonic distortion<0.1 %

Product Detail

Details

Mixing desks love balanced signals –but not all signal sources deliver them. Guitar or bass amps and keyboards rarely have balanced outputs, and guitars cannot be connected directly to a mixer. This is where the KLOTZ DX10 comes in!
A DI box converts a high-ohm unbalanced signal into a low-ohm balanced signal. To do this, the signal from the instrument is fed into the DI box between the instrument and the amp. “DI” stands for “direct injection” because the DI box is directly “injected” or fed with the instrument signal.
The KLOTZ DX10 then balances the signal so that it can be transmitted over long distances without hiss or background noise before it is fed into a mixer for further processing. The KLOTZ DX10 is a passive DI box; unlike active DI boxes, it does not require an external power supply. Just connect it up, and away you go!
We ensure all our components are manufactured to high quality in conformity with our rigorous company standards. The transformer is by far the most important component in a DI box, and the one that has the most influence on the sound. It has a 6+6:1 transformer ratio. The transformer we use in the KLOTZ DX10 was developed by us in-house with special care, to reflect its crucial role in the performance and sound behaviour of the DI box. Only the best materials were good enough. We chose mu-metal, a soft magnetic nickel-iron alloy with outstanding permeability (magnetic conductivity). The KLOTZ DX10 offers neutrality and stability of sound that is superior to other DI boxes on the market. Say goodbye to distortion!
We applied the same high quality standards when choosing the other components. The ultra-rugged housing easily copes with the stresses and strains of live performance. We’re so convinced by our quality that every KLOTZ DX10 carries a 5-year warranty!

Downloads